|
Chemical Name |
Sodium Dibutyl Dithiocarbamate |
|
Molecular Formula |
C9H18NS2Na |
|
Molecular Weight |
227 |
|
CAS NO.:. |
145638-46-6 |
|
Chemical Structure |
|
Specification:
|
ITEMS |
Data |
|
Appearance |
Pale yellow green to light brown liquid |
|
Content % |
40-42 |
|
Density (g/cm3) |
1.075-1.09 |
|
PH |
8-10 |
|
NaOH Free NaOH % |
0.05-0.5 |
Properties:
Soluble in water, non-toxic, not suitable to touch with iron container.
Appilcations:
TP is an ultra-fast accelerator for natural rubber, styrene-butadiene rubber, chloroprene rubber and latex. It is safe at set time because of its curing velocity is lower much to ammonia salt of dithiocarbamate. TP is mainly suitable for latex products because it is easily soluble in water. It is also used a little in dry rubber. TP can be used for making dip-molding products, medical rubbers, balloons, coated fabrics, self-curing rubbers, etc. due to it is no staining, no discolouring and no tasting. TP is regulated for use in articles in contact with food as specified under FDA 21 CFR177.2600 and under BgVV XXI, Category 1 (latex only) and Categories 2-4.
Package:
- Drilling Chemicals (15)
- Oil Extracting Series (0)
- Oilfield Biocide (3)
- Other Oilfield Chemicals (16)
- Scale and Corrosion Inhibitor (5)
- Bactericide and Algicide (4)
- Corrosion Inhibitor (5)
- Oxygen Scavenger (5)
- Organophosphoric Salts (5)
- Organophosphine Antiscale (10)
- Polycarboxylic Antiscale (6)
- Amino Acid Series (23)
- Cosmetics Additives (20)
- Feed and Food additives (69)
- Pharmaceutical Materials (46)
- Rubber addtives (59)
- Other Fine Chemicals (0)
